Hayward Omnilogic Lights Not Syncing. Navigate the Hayward OmniLogic App OMNIDIRECT MODE FEATURES » Instant navigation to desired colors or light shows (no more cycling through every option) » Dimming capabilities (20% increments) » Speed adjustment for light shows A month or so ago I updated the firmware on my omnilogic
Hayward OmniLogic Sense & Dispense, HLCHEM EZ Pool & Spa Supply from www.eztestpools.com
I tried the turn on, then off for 12 seconds then back on method and it didn't work This is what Hayward says on Google-To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on
Hayward OmniLogic Sense & Dispense, HLCHEM EZ Pool & Spa Supply
Resync Lights - Manually 7 Resync Lights - OmniLogic 8 Resync Lights - ColorLogic Light Controller 9 Check Light Mode - Manually 10 Change Light Mode - Manually 11 Reset ColorLogic to Default (Network ONLY) 12 Find Network Light(s) 13-14 Additional Information Pg I tried the turn on, then off for 12 seconds then back on method and it didn't work This is how to sync Hayward LED pool lights from service mode, the way you had to do it before OmniLogic firmware 4.0 and higher
Hayward OmniLogic 4 Relay Module, HLRELAYBANK (HAY302105) EZ Test. OMNIDIRECT MODE FEATURES » Instant navigation to desired colors or light shows (no more cycling through every option) » Dimming capabilities (20% increments) » Speed adjustment for light shows The light should blink one of 4 colors indicating which mode it is currently in
Hayward Omnilogic Troubleshooting Guide. Regardless of whichever one i choose, they seem to be running in a loop now, and are all coming on at the same time, creating a very frustrating pattern of random light shows. Refer to the included color card as a quick reference to the available programs.